Bambu Lab A1

Issue 1: Too low Z Offset / Wrong Temp for PETG

Problem with Z Offset + Temperature + Max Volumetric speed

Filament: PETG

Printing Speed Mode: Luminous
Z Offset: 0.06
Temp: 265
Max Volumetric Speed: 12 mm3/s
Filament:

PETG

 

;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==
;curr_bed_type={curr_bed_type}
{if curr_bed_type=="Textured PEI Plate"}
G29.1 Z{0.06} ; for Textured PEI Plate
{endif}

Result: Good Print Surface